In stone production, crushers are the most commonly used equipment, which are needed for primary crushing, fine crushing and stone shaping! During operation, the equipment suffers severe wear due to high friction and gravity. Therefore, to ensure normal and continuous production, it is essential to keep the machine running properly and do a good job in daily maintenance of the crusher, especially the maintenance work in winter!

For this reason, the editor specially shares with you: Bearings and lubrication systems are key components of crusher equipment, which must be regarded as the focus of crusher maintenance in winter and cannot be ignored.

In ore crushing and grinding production, the bearings of crushers are most prone to damage due to heavy wear. Therefore, during use, it is necessary to pay attention to maintenance, add oil regularly to extend the service life of bearings and save maintenance and replacement costs.

Paying regular attention to and timely lubricating the friction surfaces can ensure the normal operation of the crusher and extend the service life of the equipment. Therefore, the maintenance of the lubrication system cannot be ignored either. The specific maintenance details are as follows: The grease added to the bearing housing should account for 50-70% of its volume, and must be replaced every three months; when changing the oil, the raceway of the bearing roller should be carefully cleaned with clean gasoline or kerosene; when the toggle plate is in contact with the toggle plate pad, lubricating grease must be injected before starting the crusher.

In addition to the maintenance of important parts such as bearings and lubrication systems, the daily maintenance of crusher equipment is also indispensable. In daily production, regular maintenance must be carried out, and the relationship between use, maintenance and upkeep should be properly handled. It is not allowed to only use the equipment without maintenance or only repair it without upkeep. Ensure that the crusher is always in good performance, can be put into operation at any time, reduce downtime due to failures, extend the service life of the equipment, thereby ensuring continuous and effective production, and finally achieve the goals of improving productivity and reducing cost input.